How to adjust cabinet door hinge
How to adjust the cabinet door hinge
STEP 1: First, use the installation measuring board or woodworking pencil to mark the positioning (the drilling margin is generally 5 mm), and then use a pistol drill or woodworking hole saw to make a 35 mm hinge cup installation hole on the door panel, and the drilling depth is generally 12 mm.
STEP 2: Put the hinge into the hinge cup hole on the door panel and fix the hinge cup with self-tapping screws; after the hinge is embedded in the door plate cup hole, open the hinge, then insert and align the side plate, and fix the base with self-tapping screws; then open and close Cabinet door effect, general hinges can be adjusted in six directions, aligned up and down, the two doors are moderate on the left and right, the best effect is best when the cabinet door is debugged, and the gap after the door is installed and closed is generally 2 mm.
Also pay attention to the gap between the hinge and the door panel must be well grasped, or it will be ugly.
Price of the Counter Hinge
- Small glass door hinge Wine cabinet display cabinet glass door hinge 6/8mm 90 degree counter door clip glass clip.
- 10 open-hole hinge hinges without slotted thickened door wardrobe bridge surface mounted marble buffer damping cabinet.
- Non-perforated glass cabinet door hinge stainless steel single door double door magnetic touch upper and lower glass hinge bead door magnetic suction.